Zenitco B-9M Light Mount
Genuine Zenitco | Lightweight CNC-milled D16T aluminum | Forms a Picatinny point close to the bore | For a Klesch light or an LTSU aiming module | Fits B-10M / B-30 / B-21M / B-11 handguards | Black
In short: the Zenitco B-9M is a lightweight CNC-milled D16T aluminum bracket that clamps onto the lower Picatinny rail of Zenitco B-10M, B-30, B-21M and B-11 handguards. It forms an ergonomic Picatinny mounting point as close to the bore as possible for a Klesch-series underbarrel light or an LTSU aiming module.
Overview
The B-9M is the stripped-down version of the B-9. It clamps onto the bottom Picatinny section of the B-10M, B-30, B-21M and B-11 handguards and forms an ergonomic mounting point for a Klesch-series light or an aiming module close to the barrel.
The difference from the B-9 is deliberate: the B-9M is 23 g lighter, but it drops the T-slot, so it cannot carry a front grip. If you want a light and a grip on the same bracket, choose the B-9.
It is machined from D16T aluminum alloy and held by two screws that are backed out before the bracket goes onto the rail and tightened once it is seated. At 45 g and 120 mm long it is the lightest mount of the family.
| ✓Zenitco B-9M Mount | x 1 |
| ✓Mounting Screws | x 2 |
| ✓User Manual | x 1 |
Compatibility Note: Clamps onto the bottom Picatinny section of the Zenitco B-10M, B-30, B-21M and B-11 handguards. Carries Klesch-series lights and aiming modules. It does not accept front grips - use the B-9 if you need one.
B-9M vs B-9: the B-9M is 23 g lighter than the
B-9, but unlike the B-9 it does not provide a point for an additional grip. Choose the B-9M when weight matters and you only need a light or aiming module; choose the B-9 if you also want to add a grip.
Key Advantages
- Places a light or LTSU aiming module as close to the bore as possible
- Clamps onto the lower Picatinny rail with two mounting screws
- Lightweight - just 45 g, 23 g lighter than the B-9
- One-piece CNC-milled D16T aluminum
- Wide operating range: -50 to +50 °C
- 60-month manufacturer warranty
Technical Specifications
| Brand | Zenitco |
| Type | Picatinny light bracket |
| Material | D16T aluminum alloy (CNC) |
| Mounting | Two mounting screws, clamps on a lower Picatinny rail |
| Fits | Zenitco B-10M / B-30 / B-21M / B-11 handguards |
| Weight | 45 ± 5 g |
| Dimensions | 120 x 28 x 18 mm (± 2 mm) |
| Operating temperature | -50 to +50 °C |
| Warranty | 60 months |
| Colors | Black, Desert |
| MPN | Zen-B-9M |
| Condition | New |
In the Box
- B-9M bracket
- 2 x mounting screws
- User manual
Frequently Asked Questions
What is the B-9M for?
It forms an ergonomic Picatinny mounting point for a Klesch-series light or an LTSU aiming module, clamping onto the lower rail of a Zenitco B-10M / B-30 / B-21M / B-11 handguard.
How does it attach?
Back the two mounting screws out to full length, slide the B-9M onto the lower Picatinny rail of the handguard, then tighten the screws. A light or aiming module can then be fitted.
How is it different from the B-9?
The B-9M is 23 g lighter, but it does not offer a point for an additional grip, whereas the B-9 does.
Can the B-9M carry a front grip?
No. Unlike the B-9 it has no T-slot. It is 23 g lighter as a result - choose the B-9 if you need a grip.
Which handguards does it fit?
The Zenitco B-10M, B-30, B-21M and B-11.
Is this a genuine Zenitco part?
Yes - it is an original Zenitco B-9M bracket with guaranteed US delivery.
Genuine Zenitco B-9M lightweight light bracket for B-10M / B-30 / B-21M / B-11 handguards.
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
General
Brand
Zenitco
Manufacturer Part Number (MPN)
Zen-B-9M
Condition
New
Intended Use
Range sports / Training
Material
D16T aluminum alloy (CNC)
Color / Finish
Black / Desert
Weight
45 g (+/- 5 g)
Dimensions (L x W x H) mm
120 x 28 x 18 mm (+/- 2 mm)
Operating Temperature
-50 to +50 °C
Mounting & Rails
Mounting
Clamps on the lower Picatinny rail of B-10M / B-30 / B-21M / B-11 handguards with two screws; 23 g lighter than B-9
Rail Type
Lightweight Picatinny light bracket; forms a point close to the bore for a Klesch light or LTSU aiming module
Function
CNC D16T aluminum; installs on the bottom Picatinny rail of the handguard with two mounting screws
