Zenitco B-9 Barrel-Level Mount - Low Picatinny Bracket for B-10M / B-10U Handguards (Lights & RK Grips)

Overview

The B-9 clamps onto the bottom Picatinny section of the Zenitco B-10M and B-10U handguards and moves the mounting point as close to the barrel as the design allows.

That low position is the point of the bracket. A Klesch-1 or Klesch-2 light or an aiming module sits tight against the barrel line instead of hanging below it, which keeps the profile clean and reduces the chance of snagging.

A T-slot in the body takes a front grip - RK-0, RK-1, RK-2, RK-4 or RK-6 - held by a single screw. A blanking plug fills the slot when no grip is fitted. Installation is two side screws and a hex key; nothing on the platform is altered.

The B-9 solves a simple problem: on a B-10M / B-10U handguard the bottom rail sits low, and the B-9 repositions a Picatinny slot right against the barrel line so an under-barrel light or a vertical grip mounts cleanly and close in. It clamps on with side screws for a solid, no-wobble fit. Because it presents a standard Picatinny interface, you can run a Klesch-1 / Klesch-2 light, a compact aiming device, or one of the RK-series vertical grips from the same bracket.

A genuine Zenitco factory part machined from D16T aluminum alloy; it measures about 135 x 35 x 35 mm and weighs about 68 g. Rated for a working temperature range of -50 to +50 C.

Technical Specifications