Zenitco Handguard Ferrule Cover for Leader and Sport Kits
- $39
In short: The Zenitco Handguard Ferrule Cover closes over the standard ferrule to help shield the hand from heat during use. It was developed for the Leader kit and also has documented fitment for selected Sport kits.
Compatibility matrix
| Configuration | Fitment | Mounting requirement |
|---|---|---|
| Leader | Compatible | Two included M5x9 screws |
| Updated Sport-1 | Conditional | The outer DL-1 slot must accept and allow rotation of a cam clamp; older versions without the cutout are incompatible |
| Sport-2, Sport-3, Sport-4 | Compatible | One screw plus one separately sold cam clamp |
| Sport-8, Sport-8U | Compatible | Two included M5x9 screws |
| B-30U, Sport-5, Sport-5U, Sport-6 | Not compatible | Do not use this cover for these configurations |
What's in the Box
- Zenitco Handguard Ferrule Cover — 1
- M5x9 screws — 2
Selection checklist
- Identify the exact Leader or Sport kit.
- For Sport-1, verify that the upper-bracket foot has the cam-clamp cutout.
- For Sport-2, Sport-3 or Sport-4, add one cam clamp; it is not supplied with the cover.
- For Leader, Sport-8 and Sport-8U, use the two included M5x9 screws.
Installation
Use the mounting method documented for the selected kit. Do not transfer the Leader two-screw arrangement to a Sport configuration that requires a cam clamp. If the exact kit revision is uncertain, compare the mounting point before ordering or contact Bazalet product support.
Frequently asked questions
What does the ferrule cover do?
It closes over the standard ferrule to help shield the hand from heat during use.
Which kit was it originally developed for?
The manufacturer originally developed it for the Leader kit, where it mounts with the two included M5x9 screws.
Does it fit every Sport-1 kit?
No. It fits the updated Sport-1 version whose upper-bracket foot has the required cam-clamp cutout. Older versions without that cutout are incompatible.
Is a cam clamp included?
No. Sport-2, Sport-3 and Sport-4 require one separately sold cam clamp plus one screw. Leader, Sport-8 and Sport-8U use the two included screws.
Zenitco Specs
General
Mounting & Rails
Care & Chemicals
Reviews from customers
Used this product? Share your experience to help other customers choose.
