Zenitco Zenitka-2GR 500 lm LED Platform Light
- $259
In short: Zenitco Zenitka-2GR is a 500 lm LED platform light for a Picatinny interface through the supplied KR-1B quick-release mount. It illuminates at distances up to 100 m, supports four brightness levels and strobe mode, and retains the selected brightness setting after switch-off.
Compatibility matrix
| Installation route | Required interface | Included or compatible component |
|---|---|---|
| Mounted use | Picatinny rail | KR-1B quick-release mount included |
| Remote activation | Zenitka-2GR control connector | KV-2, KV-2P or KV-3 remote switch |
| Handheld use | No mounting interface required | Wrist loop and spring belt/pocket clip |
Selection checkpoint: direct mounting requires a Picatinny interface and KR-1B. KR-1 and KR-1U are documented alternative Picatinny mounting routes. No direct installation on an unlisted interface is stated by the manufacturer.
Purpose and controls
The machined D16T aluminum body combines a hardened anti-reflective protective lens with a low-charge indicator and emergency activation when the rechargeable cell is depleted. Maximum brightness is available directly from any preset level.
Technical specifications
| Light output | 500 lm LED |
|---|---|
| Documented illumination distance | Up to 100 m |
| Modes | Four brightness levels; strobe; direct maximum-brightness access |
| Power | Rechargeable lithium-ion cell or two CR123A cells |
| Maximum-output runtime | At least 1.2 hours with a fully charged rechargeable cell |
| Material and finish | D16T aluminum alloy; Black |
| Weight | 180 ± 10 g |
| Dimensions | 147 × 33 mm, ±5 mm |
| Operating temperature | −20 to +40 °C |
| Manufacturer period | 12 months for storage and operation |
Installation and power
Secure KR-1B to the Picatinny interface, lock the quick-release mechanism and confirm retention. Install either the supplied rechargeable cell or two CR123A cells with the specified polarity. A KV-2, KV-2P or KV-3 may be connected when remote activation is required.
What's in the Box
| Zenitco Zenitka-2GR | × 1 |
| KR-1B quick-release mount | × 1 |
| Rechargeable cell | × 1 |
| Charger | × 1 |
| Wrist loop | × 1 |
| Pouch | × 1 |
| Operating manual | × 1 |
Frequently asked questions
Which mounting interface does Zenitka-2GR require?
The included KR-1B secures it to a Picatinny rail.
Which remote switches are compatible?
The manufacturer lists KV-2, KV-2P and KV-3.
Can it use disposable cells?
Yes. It supports two CR123A cells as an alternative to the rechargeable lithium-ion cell.
Does it remember the selected brightness?
Yes. The selected brightness setting is retained after switch-off.
General
Mounting & Rails
Kit Contents
Care & Chemicals
Reviews from customers
Used this product? Share your experience to help other customers choose.
