Zenitco Klesch-1 V2.1 Focused Rail-Mounted Flashlight
- $549
In short: The Zenitco Klesch-1 V2.1 is a focused LED flashlight supplied as a complete two-configuration kit. It provides at least 350 lx in constant mode and 500 lx in tactical mode at 5 m, and includes two rear caps, a KV-D1P V2.0 remote switch and two installed CR123A cells.
Compatibility checkpoint
- Documented compact-platform models: Glock 17, Yarygin and Grand Power T10.
- Yarygin installation: requires the separate B-8 adapter.
- Connector: V2.1 uses the current Zenitco connector. The supplied KV-D1P V2.0 remote switch matches this version.
- Configuration: the supplied rear caps support compact and extended setups; confirm the mounting interface before installation.
Focused illumination
The reflector produces a concentrated beam for observation and inspection in limited light. The manufacturer measures illuminance at the center of the light spot on a surface 5 m away, with ambient illumination no greater than 0.3 lx.
Technical specifications
| Illuminance at 5 m | At least 350 lx constant / 500 lx tactical |
|---|---|
| Power | 2 × CR123A 3 V cells, installed |
| Stable continuous runtime | At least 1.2 hours in constant mode |
| Dimensions | 78 × 38 × 37 mm, ±3 mm, with compact rear cap |
| Weight | 82 ± 3 g, without cells, with compact rear cap |
| Operating range | −20°C to +40°C |
| Manufacturer warranty | 12 months |
What's in the Box
- Klesch-1 V2.1 with compact rear cap installed — 1
- Rear cap for extended configuration — 1
- CR123A 3 V cells, installed — 2
- KV-D1P V2.0 remote switch — 1
- Operating manual — 1
Installation
Select the rear cap for the intended setup, confirm the mounting interface and follow the supplied manual. Use the B-8 adapter for the documented Yarygin installation.
Frequently asked questions
Are 350 and 500 lumen ratings?
No. They are illuminance values in lux, measured at the center of the light spot at 5 m: at least 350 lx constant and 500 lx tactical.
Is the remote switch included?
Yes. The complete kit includes one KV-D1P V2.0 remote switch for the current Zenitco connector.
Does the Yarygin setup need an adapter?
Yes. The manufacturer specifies the separate B-8 adapter for this installation.
What is the documented runtime?
At least 1.2 hours of stable continuous output in constant mode with the supplied cells.
Zenitco Specs
General
Mounting & Rails
Care & Chemicals
Reviews from customers
Used this product? Share your experience to help other customers choose.
