Zenitco KV-0 Remote Switch for Klesch Series — New Connector
- $59
Available Options
In short: The Zenitco KV-0 is a wired remote switch for compatible Klesch-series devices using this new-connector configuration. Select the cable length required for your setup.
Compatibility checkpoint
- Product family: documented for the Klesch series.
- Restriction: the manufacturer states that KV-0 is not compatible with devices marked version 2.0 or 3.0.
- Connector: compare the connector on your device with the product photographs before ordering.
Cable length choices
The current manufacturer assortment lists 9, 12, 16, 18, 23, 30, 35, 40 and 50 cm configurations, measured from the connector to the switch. Cable length is a required selection.
Technical specifications
| Product type | Wired remote switch |
|---|---|
| Compatible family | Klesch series, excluding versions 2.0 and 3.0 |
| Available cable lengths | 9, 12, 16, 18, 23, 30, 35, 40 or 50 cm |
| Operating range | −20°C to +40°C |
| Manufacturer warranty | 12 months |
What's in the Box
- KV-0 remote switch in the selected cable length — 1
Selection and connection
- Confirm that the connected Klesch-series device is not marked version 2.0 or 3.0.
- Compare its connector with the detailed product photograph.
- Select the cable length that places the switch at the intended control position without unnecessary slack.
- Connect and check correct operation according to the instructions supplied with the compatible device.
Frequently asked questions
Does KV-0 work with versions 2.0 or 3.0?
No. The manufacturer explicitly excludes devices marked version 2.0 and 3.0.
Which cable lengths can I choose?
The available selections are 9, 12, 16, 18, 23, 30, 35, 40 and 50 cm.
How is cable length measured?
The manufacturer measures it from the connector to the switch.
How do I confirm the connector?
Check the version marking and compare the physical connector on your device with the detailed product photograph before ordering.
Installation
Confirm the required interface before installation: matching documented Klesch connector and selected cable length. Fit the component according to the manufacturer instructions, then verify the resulting interface or function: remote-control interface in the selected 9–50 cm cable configuration.
General
Mounting & Rails
Care & Chemicals
Reviews from customers
Used this product? Share your experience to help other customers choose.
