Zenitco DTK Saiga-9 Muzzle Brake / Shot Stabilizer - Titanium VT-6 for Saiga-9 9mm platforms (16x1 RH Thread)
- $249
Official distributorVerified product sourcing
Worldwide deliveryInternational destinations
Product supportBefore and after purchase
Zenitco DTK Saiga-9 Muzzle Brake / Shot Stabilizer
Genuine Zenitco | Titanium alloy VT-6 | For Saiga-9 9mm platforms | 16x1 RH thread
In short: the Zenitco DTK Saiga-9 is a genuine titanium muzzle brake / shot stabilizer that compensates recoil for a steadier, flatter-range use Saiga-9 9mm platform. Machined from lightweight, corrosion-resistant VT-6 titanium alloy, it installs in place of the standard muzzle device on a 16x1 right-hand thread.
Overview
The DTK Saiga-9 is a shot stabilizer that replaces the standard muzzle device on the Saiga-9 platform. Its job is to compensate recoil and hold the muzzle down between shots.
It also cuts the visible flash and spreads the sound rather than concentrating it, which makes the report noticeably more comfortable for the user and reduces the load on hearing.
The body is VT-6 titanium alloy - 352 g over 204 mm, corrosion-proof and dimensionally stable when hot. It threads on 16x1 RH. Zenitco recommends it with the standard handguard or with the B-21U, B-21M or B-21L; it cannot be used inside the Sport-2 or Sport-3 kits.
What's in the Box
| ✓Zenitco DTK Saiga-9 Shot Stabilizer | x 1 |
Compatibility: for the Saiga-9 9mm platform with a 16x1 right-hand (RH) muzzle thread; it replaces the standard muzzle device. Best used with the standard handguard or with the B-21U / B-21M / B-21L handguards. Note: it cannot be used together with the Sport-2 or Sport-3 handguard kits. Check your thread before ordering.
Important: this is a muzzle brake / shot stabilizer, not a sound muzzle device. It does not reduce the sound of the shot - overall sound pressure stays the same.
Key Advantages
- Genuine Zenitco muzzle brake / shot stabilizer for the Saiga-9
- Lightweight, corrosion-resistant VT-6 titanium alloy
- Compensates recoil for faster, flatter follow-up shots
- Installs in place of the standard muzzle device (16x1 RH)
- Pairs with the standard handguard or B-21U / B-21M / B-21L
Technical Specifications
| Brand | Zenitco |
| Part Type | Muzzle brake / shot stabilizer |
| Platform | Saiga-9 (9mm platform) |
| Thread | 16x1 right-hand (RH) |
| Material | Titanium alloy VT-6 |
| Weight | 352 ± 5 g |
| Dimensions | (204 x 44) ± 3 mm |
| Warranty | 12 months |
| MPN | Zen-DTK-Saiga-9 |
| Condition | New |
Frequently Asked Questions
What does the DTK Saiga-9 do?
It is a muzzle brake / shot stabilizer: it compensates recoil so the Saiga-9 stays flatter and settles faster between shots.
Is it a sound muzzle device?
No. It is a muzzle brake / stabilizer, not a muzzle device - it does not reduce the sound of the shot.
What is it made of?
Lightweight, corrosion-resistant VT-6 titanium alloy; weight 352 ± 5 g, size (204 x 44) ± 3 mm, 16x1 RH thread.
Which handguards work with it?
The standard handguard or the B-21U / B-21M / B-21L. It cannot be used with the Sport-2 or Sport-3 handguard kits.
Can I use it with the Sport-2 or Sport-3 kit?
No. Those kits leave no room for it. Use the standard handguard or the B-21U, B-21M or B-21L.
What thread does it use?
16x1 right-hand, the standard Saiga-9 muzzle thread.
Related products: the DTK-2V muzzle brake for 9mm platforms, the B-21U handguard, and the DTK-2 by Zenitco.
Flatten recoil on your Saiga-9 - order the genuine Zenitco titanium DTK Saiga-9 stabilizer.
Installation
Confirm the required interface before installation: 16x1 RH threaded installation point in place of the standard front device. Fit the component according to the manufacturer instructions, then verify the resulting interface or function: titanium recoil and rise compensating attachment.
Zenitco Specs
Component type
Muzzle device
General
Brand
Zenitco
Manufacturer Part Number (MPN)
DTK Saiga-9 muzzle brake / shot stabilizer
Condition
New
Intended Use
sporting use / practice
Material
Titanium alloy VT-6
Color / Finish
Titanium (natural)
Weight
352 ± 5 g
Dimensions (L x W x H) mm
204 x 44 ± 3 mm
Mounting & Rails
Mounting method
For the Saiga-9 9mm platform, 16x1 RH thread; pairs with standard handguard or B-21U/B-21M/B-21L (not with Sport-2/Sport-3)
Rail Type
Titanium muzzle brake / shot stabilizer: compensates recoil; installs in place of the standard muzzle device; 16x1 RH; 352g; (204x44)mm; NOT a sound muzzle device
Function
Zenitco DTK Saiga-9 titanium VT-6 muzzle brake / shot stabilizer for Saiga-9 9mm, 16x1 RH
Care & Chemicals
Compatible platforms / hosts
Saiga-9 9 mm configuration with 16x1 RH front thread and standard, B-21U, B-21M or B-21L handguard
Required interface / configuration
16x1 RH threaded installation point in place of the standard front device
Resulting interface / function
titanium recoil and rise compensating attachment
Exclusions / limitations
Sport-2 and Sport-3 handguard configurations; other thread sizes
Customer feedback
Reviews from customers
Used this product? Share your experience to help other customers choose.
