Zenitco DTK-1L/366 Muzzle Brake-Compensator for .366 TKM Carbines
Genuine Zenitco | Steel (20Kh13) | .366 TKM | 14x1 LH thread | Toothed glass-breaker crown | About 137 g
In short: the DTK-1L/366 is a genuine Zenitco muzzle brake-compensator made for .366 TKM caliber carbines - the VPO-209 and the AK-366 Lancaster. It cuts felt recoil and holds down muzzle rise, and its toothed front crown works as a hard bracing tip that can also break tempered glass. Machined from 20Kh13 steel; about 137 g; left-hand 14x1 muzzle thread.
The DTK-1L/366 threads onto the muzzle of a .366 TKM carbine and redirects propellant gases to reduce recoil and counter muzzle climb, so follow-up shots stay on target. The front is finished with a toothed "crown" that lets you brace the muzzle against a hard surface and, if needed, break tempered glass.
This is the .366-caliber version of the DTK-1L and uses a left-hand 14x1 muzzle thread. It is machined from 20Kh13 steel with a natural steel finish, weighs about 137 g (+/- 5 g) and measures about 32 x 85 mm (+/- 3 mm). Manufacturer storage and service life: 60 months.
Compatibility Note: Made for .366 TKM caliber carbines with a left-hand 14x1 muzzle thread - the VPO-209 and the AK-366 Lancaster. Confirm your muzzle thread before ordering. This is the .366 version; for other calibers see the standard DTK-1L Muzzle Brake. Ships with the DTK-1L/366 and a manual.
Key Advantages
Genuine Zenitco factory part with exact original fit
Reduces felt recoil and compensates muzzle rise
Toothed front crown - hard bracing tip and tempered-glass breaker
Made for .366 TKM carbines (VPO-209 / AK-366 Lancaster), 14x1 LH thread
It is a genuine Zenitco muzzle brake-compensator for .366 TKM caliber carbines. It reduces recoil, compensates muzzle rise, and has a toothed front crown for bracing and breaking tempered glass.
What does it fit?
.366 TKM caliber carbines with a left-hand 14x1 muzzle thread - the VPO-209 and the AK-366 Lancaster. Confirm your muzzle thread before ordering.
What thread does it use?
A left-hand 14x1 muzzle thread.
What is the crown for?
The toothed front crown is a hard bracing tip - you can brace the muzzle against a surface, and it can break tempered glass if needed.
How is it different from the standard DTK-1L?
This is the .366 TKM version with a 14x1 LH thread. The standard DTK-1L is made for other calibers and thread sizes.
Is this a genuine Zenitco part?
Yes - it is an original Zenitco part with guaranteed US delivery.
