Zenitco DTK-1P Muzzle Brake for PK and PKM
- $139
In short: Zenitco DTK-1P is a steel brake-compensator made specifically for PK and PKM platforms with an M18×1.5 left-hand thread. Confirm both the model and thread direction before ordering.
Compatibility hierarchy
| Compatible model | Required interface | Thread direction |
|---|---|---|
| PK | M18×1.5 | Left-hand |
| PKM | M18×1.5 | Left-hand |
Selection checkpoint: a similar diameter or appearance is not enough. The host model must be PK or PKM and its interface must be M18×1.5 LH.
Purpose and construction
The DTK-1P redirects expanding gases to reduce rearward movement and compensate upward movement. Its body is made from 20X13 steel and measures 30 × 74 mm within the manufacturer tolerance.
Technical specifications
| Compatible models | PK; PKM |
|---|---|
| Thread | M18×1.5 left-hand |
| Material | 20X13 steel |
| Weight | 136 ± 5 g |
| Dimensions | 30 × 74 mm, tolerance ±3 mm |
| Manufacturer warranty period | 60 months for storage and operation |
Installation checkpoint
- Confirm PK or PKM model compatibility.
- Verify an M18×1.5 left-hand interface.
- Start the component by hand in the left-hand direction and confirm smooth engagement.
- Secure it according to the supplied operating manual and check alignment.
What's in the Box
| Zenitco DTK-1P | × 1 |
| Operating manual | × 1 |
Frequently asked questions
Which models does DTK-1P fit?
The manufacturer documents DTK-1P for PK and PKM.
Which thread is required?
M18×1.5 left-hand. Confirm the diameter, pitch and left-hand direction before ordering.
What is it made from?
20X13 steel.
What is included?
One DTK-1P and one operating manual.
Zenitco Specs
General
Mounting & Rails
Kit Contents
Care & Chemicals
Reviews from customers
Used this product? Share your experience to help other customers choose.
