TD Russia SMA Adatara Barrel and Magazine Tube Clamp, M-LOK
- $149
Official distributorVerified product sourcing
Worldwide deliveryInternational destinations
Product supportBefore and after purchase
Available Options
SMA Adatara - Ties the Tube to the Barrel, Adds M-LOK
Two machined halves, four cushioned jaws, one M-LOK slot per side.
In short: A duralumin clamp that locks an under-barrel magazine tube to the barrel and gives you an M-LOK slot on each side for a light or a hand stop.
Overview
An under-barrel tube that is only anchored at the receiver can move relative to the barrel. Tying the two together settles that, and it gives the front end somewhere solid to hang accessories from.
The Adatara is two machined halves with four polymer-lined jaws, so the clamping load spreads instead of biting into the finish. Two screws pull it together.
Each side carries a single M-LOK slot. That is enough for a light, a hand stop or a sling mount, and no more than that - the point is to keep the front end slim.
What's in the Box
| ✓1 | x |
| ✓2 | x |
| ✓4 | x |
Compatibility: For 12 gauge shotguns with an under-barrel magazine tube. Measure the barrel and tube diameters before ordering - the jaws are cut for common sizes and there is limited take-up.
Key Advantages
- Ties the magazine tube to the barrel
- One M-LOK slot on each side
- Machined duralumin, hard anodised
- Cushioned jaws protect the finish
- 60 g
- Black or red anodising
Technical Specifications
| Material | Duralumin, anodised |
| Interface | M-LOK, one slot per side |
| Fasteners | 2 clamping screws |
| Weight | 60 g |
| Finishes | Black, Red |
| MPN | 00536 (black), 00537 (red) |
| Brand | TD Russia |
Frequently Asked Questions
Will it fit my barrel?
It is cut for common 12 gauge barrel and tube diameters. Measure both before ordering.
Does it mark the barrel?
The jaws are lined, so it clamps without cutting into the finish. Do not overtighten.
How much can I hang on it?
One M-LOK slot per side - a light, a hand stop or a sling mount. It is not a full accessory rail.
Does it affect barrel harmonics?
Any clamp does to a degree. On a smoothbore at shotgun distances this is not a practical concern.
Can I fit it with the magazine extension in place?
Yes, as long as the clamp sits on a straight section of both tube and barrel.
What tools do I need?
A hex key for the two screws.
Related products: TD Russia SMA Bakanovi Bipod Mount | TD Russia M-LOK Insert Nut | TD Russia Shell Carrier
Order the SMA Adatara clamp from Bazalet - worldwide shipping.
In Stock | Guaranteed US Delivery | Genuine TD Russia Part
Related: TD Russia SMA Bakanovi Bipod Mount | TD Russia M-LOK Insert Nut | TD Russia Shell Carrier
In Stock | Guaranteed US Delivery | Genuine TD Russia Part
Related: TD Russia SMA Bakanovi Bipod Mount | TD Russia M-LOK Insert Nut | TD Russia Shell Carrier
General
Type
Barrel and magazine tube clamp
Brand
TD Russia
Manufacturer Part Number (MPN)
00536
Condition
New
Intended Use
12 gauge shotguns with an under-barrel magazine tube
Material
Anodised duralumin
Color / Finish
Black or red anodising
Weight
60 g
Operating Temperature
Clamps barrel to under-barrel tube; one M-LOK slot each side
Customer feedback
Reviews from customers
Used this product? Share your experience to help other customers choose.
