Zenitco KV-5PU Remote Pressure Switch
- $149.00
-
Zenitco KV-5PU Remote Pressure Switch
Genuine Zenitco | Picatinny-mounted remote switch for the updated Perst-4 aiming module
In short: the Zenitco KV-5PU is a corded remote switch for the updated Zenitco Perst-4 aiming module, clamping to a Picatinny rail so you can fire the aiming module without shifting your grip.
Overview
The KV-5PU is the remote button for the updated Zenitco Perst-4 aiming module. You plug it into the Perst, position the pad on your rail, and activate the aiming module with a light press.
It clamps to any Picatinny (1913) rail with captive set screws. Note: it is the U (universal) version for the updated Perst-4 - if your Perst-4 is the earlier one, the KV-5P is the matching switch.
What's in the Box
| ✓KV-5PU Remote Pressure Switch | x 1 |
| ✓User Manual | x 1 |
Key Advantages
- Remote activation for the updated Zenitco Perst-4 aiming module
- Clamps to any Picatinny (1913) rail
- Captive set screws lock it in place
- Genuine Zenitco part
Technical Specifications
| Brand | Zenitco |
| Type | Remote pressure switch |
| Mounting | Picatinny (1913) |
| Fits | Zenitco Perst aiming module (updated Perst-4) |
| Warranty | Manufacturer warranty (storage and service life): 60 months |
| MPN | Zen-KV-5PU |
| Condition | New |
Frequently Asked Questions
What does the KV-5PU do?
It is a remote switch that fires the updated Zenitco Perst-4 aiming module from a pad mounted on your rail.
How does it mount?
It clamps onto a standard Picatinny (1913) rail with captive set screws.
KV-5P or KV-5PU?
The KV-5PU is for the updated Perst-4; the KV-5P is for the earlier Perst-4. The updated Perst-4 carries a KV-5PU engraving under the button connector. If unsure, send us your Perst model.
How is the KV-5PU different from the KV-5P?
The U version is built for the updated connector generation. Check which connector your device uses before ordering.
How do I keep the cable tidy?
Use an FP-1, FP-2 or FP-3 wire holder to route the cable along the rail or the Bazis guide.
Is this a genuine Zenitco part?
Yes - an original Zenitco part with guaranteed US delivery.
Genuine Zenitco KV-5PU - ready to ship.
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
Compatibility Note: Mounts on a Picatinny section or a handguard surface, with the cable routed to the device and held by an FP-series wire holder. Check your connector generation before ordering - early and updated connectors differ.
Genuine Zenitco part, shipped from the USA.
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
General
Mounting
Picatinny (1913)
Type
Remote pressure switch
Brand
Zenitco
Manufacturer Part Number (MPN)
Zen-KV-5PU
Condition
New
Intended Use
Zenitco Perst aiming modules (updated Perst-4)
Mounting & Rails
Mounting
Picatinny (1913)
Function
Remote pressure switch
