Zenitco KV-0 Remote Switch for Klesch Series — Old Connector
- $59
Available Options
In short: Zenitco KV-0 with the old connector is a remote switch for Klesch-series lights that use the matching legacy connector. Choose the cable length before adding it to the cart: 9, 12, 16, 18, 23, 30, 35, 40 or 50 cm.
Compatibility matrix
| Compatible family | Required connector | Available lengths |
|---|---|---|
| Klesch-series lights | Old-generation connector matching the product photographs | 9 / 12 / 16 / 18 / 23 / 30 / 35 / 40 / 50 cm |
Selection checkpoint: connector generation is decisive. This version does not fit the later connector or the modern D-series interface. The manufacturer also documents a side-entry connector version; confirm connector direction before ordering if your routing requires it.
Purpose and configuration
KV-0 moves light activation to a remote pad secured in the preferred control position. Nine cable lengths allow routing without unnecessary slack while preserving the legacy connector required by compatible Klesch-series lights.
Technical specifications
| Compatible family | Klesch-series lights with the old connector only |
|---|---|
| Cable lengths | 9, 12, 16, 18, 23, 30, 35, 40 and 50 cm |
| Connector variants documented | Standard direction; side-entry version |
| Operating temperature | −20 to +40 °C |
| Manufacturer period | 12 months of operation |
Installation
Verify the old-generation connector visually before connection. Route the selected cable without tight bends, connect it fully and secure the pad where it can be reached without pulling the cable. Confirm correct response before use.
What's in the Box
| Zenitco KV-0 old-connector remote switch in the selected cable length | × 1 |
Frequently asked questions
Which products are compatible?
Klesch-series lights that have the matching old-generation connector.
Which cable lengths are available?
9, 12, 16, 18, 23, 30, 35, 40 and 50 cm.
Does it fit the later connector?
No. Choose the separate later-connector KV-0 version for that interface.
Is a side-entry connector available?
The manufacturer documents that configuration; confirm the required connector direction before ordering.
General
Mounting & Rails
Kit Contents
Care & Chemicals
Reviews from customers
Used this product? Share your experience to help other customers choose.
