Zenitco KV-5P Remote Pressure Switch
Zenitco KV-5P Remote Pressure Switch
Genuine Zenitco | Picatinny-mounted remote switch for Perst aiming module
In short: the Zenitco KV-5P is a corded remote switch for Zenitco Perst aiming module (early Perst-4 and similar), clamping to a Picatinny rail so you can fire the aiming module without shifting your grip.
Overview
The KV-5P is the remote button for Zenitco Perst aiming module units. You plug it into the Perst, position the pad on your rail, and activate the aiming module with a light press.
It clamps to any Picatinny (1913) rail with captive set screws. Note: it is intended for the earlier (pre-update) Perst-4 - if your Perst-4 is the updated version, the KV-5PU is the matching switch.
What's in the Box
| ✓KV-5P Remote Pressure Switch | x 1 |
| ✓User Manual | x 1 |
Key Advantages
- Remote activation for Zenitco Perst aiming module
- Clamps to any Picatinny (1913) rail
- Captive set screws lock it in place
- Genuine Zenitco part
Technical Specifications
| Brand | Zenitco |
| Type | Remote pressure switch |
| Mounting | Picatinny (1913) |
| Fits | Zenitco Perst aiming module (early Perst-4) |
| Warranty | Manufacturer warranty (storage and service life): 60 months |
| MPN | Zen-KV-5P |
| Condition | New |
Frequently Asked Questions
What does the KV-5P do?
It is a remote switch that fires a connected Zenitco Perst aiming module from a pad mounted on your rail.
How does it mount?
It clamps onto a standard Picatinny (1913) rail with captive set screws.
KV-5P or KV-5PU?
The KV-5P is for the earlier Perst-4; the KV-5PU is for the updated Perst-4 (marked with a KV-5PU engraving under the button connector). If unsure, send us your Perst model.
What does the KV-5P control?
It is made for the Perst aiming module. The connector version - current or older - is selected when ordering, so check which one your device uses.
How does it mount?
Back the two set screws out, place the switch anywhere on a Picatinny rail, then tighten the screws down. The cable plugs into the tailcap of the device it controls.
Is this a genuine Zenitco part?
Yes - an original Zenitco part with guaranteed US delivery.
Genuine Zenitco KV-5P - ready to ship.
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
Compatibility Note: Mounts on a Picatinny section or a handguard surface, with the cable routed to the device and held by an FP-series wire holder. Check your connector generation before ordering - early and updated connectors differ.
Genuine Zenitco part, shipped from the USA.
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
General
Mounting
Picatinny (1913)
Type
Remote pressure switch
Brand
Zenitco
Manufacturer Part Number (MPN)
Zen-KV-5P
Condition
New
Intended Use
Zenitco Perst aiming modules (early Perst-4)
Mounting & Rails
Mounting
Picatinny (1913)
Function
Remote pressure switch
