Zenitco KV-2 Remote Switch for Zenitka-2D and 2GR
- $79
Official distributorVerified product sourcing
Worldwide deliveryInternational destinations
Product supportBefore and after purchase
In short: The Zenitco KV-2 is a corded remote switch made specifically for the Zenitka-2D and Zenitka-2GR lights. It replaces the light's standard rear control and secures to a Picatinny rail with the supplied clamping hardware.
Compatibility checkpoint
- Compatible models: Zenitka-2D and Zenitka-2GR.
- Connection: the threaded rear section replaces the light's standard rear control.
- Mounting interface: Picatinny rail, using two clamping plates and four screws.
- Selection: choose KV-2 only for the two documented Zenitka models above.
Technical specifications
| Material / finish | D16T aluminum alloy / black coating |
|---|---|
| Weight | 70 g; manufacturer lists a +5 g tolerance |
| Dimensions | 30 × 27 × 330 mm; manufacturer lists a +10 mm tolerance |
| Operating range | −20°C to +40°C |
| Manufacturer warranty | 12 months |
What's in the Box
- KV-2 remote switch — 1
- Operating manual — 1
Installation
- Remove the standard rear control from the compatible Zenitka light.
- Thread the KV-2 rear section into its place.
- Back out the mounting screws, position the switch on the Picatinny rail and tighten the screws evenly.
Frequently asked questions
Which lights work with the KV-2?
The manufacturer documents compatibility with the Zenitka-2D and Zenitka-2GR.
How does it connect?
Its threaded rear section replaces the standard rear control on the compatible light.
How does the switch mount?
It secures to a Picatinny rail with two clamping plates and four screws.
What is included?
The package contains one KV-2 remote switch and one operating manual.
General
Mounting interface
Threaded Zenitka rear connection; Picatinny switch mount
Product type
Corded remote switch
Brand
Zenitco
Condition
New
Intended Use
Zenitka-2D and Zenitka-2GR lights only
Material
D16T aluminum alloy; black coating
Weight
70 g; manufacturer lists a +5 g tolerance
Dimensions (L x W x H) mm
30 × 27 × 330 mm; manufacturer lists a +10 mm tolerance
Operating Temperature
−20°C to +40°C
Mounting & Rails
Mounting method
Picatinny rail with two clamping plates and four screws
Function
Remote activation for Zenitka-2D and Zenitka-2GR
Care & Chemicals
Compatible platforms / hosts
Zenitka-2D and Zenitka-2GR only
Required interface / configuration
threaded Zenitka rear-control connection plus compatible Picatinny rail for the switch
Resulting interface / function
remote activation of the documented Zenitka-2D or Zenitka-2GR
Exclusions / limitations
all other Zenitka models, incompatible rear-control threads and positions without compatible Picatinny
Customer feedback
Reviews from customers
Used this product? Share your experience to help other customers choose.
