Zenitco Klesch-2 V2.1 Visible and IR Picatinny Flashlight
- $1 359
In short: The Zenitco Klesch-2 V2.1 combines visible and infrared illumination in one Picatinny-mounted unit. The side button selects the output, while the supplied IR filter diffuses infrared light and removes the visible red point.
Compatibility checkpoint
- Mounting interface: Picatinny rail through the supplied B-9M mount.
- Remote control: V2.1 uses Zenitco's proprietary connector and includes a KV-D2P V2.0 remote switch.
- Infrared output: intended for compatible night-observation equipment.
Modes and IR filter
The side button changes between visible and infrared output. In infrared mode, the supplied filter creates diffuse illumination and removes the visible red point from the emitter. Install the filter only as described in the supplied manual.
Technical specifications
| Light outputs | Visible and infrared |
|---|---|
| Mode selection | Side button |
| Power | 2 × CR123A batteries, installed |
| Dimensions | 91 × 64 × 42 mm (±5 mm), with preinstalled rear section and without IR filter |
| Weight | Up to 180 g, including batteries, with preinstalled rear section and without IR filter |
| Operating range | −30°C to +40°C |
| Manufacturer warranty | 12 months |
What's in the Box
- Klesch-2 V2.1 with preinstalled rear section — 1
- CR123A batteries, installed — 2
- Aluminum storage case — 1
- KV-D2P V2.0 remote switch — 1
- IR filter — 1
- B-9M mount — 1
- Alternate rear section — 1
- Operating manual — 1
Installation and use
Use the supplied B-9M to install the unit on a compatible Picatinny rail. Fit the rear section required for the intended configuration, connect only the documented KV-D2P V2.0 remote and follow the manual for battery, filter and control setup.
Frequently asked questions
How are visible and infrared modes selected?
Use the side button on the body to change the active output.
What does the supplied IR filter do?
It diffuses the infrared output and removes the visible red point produced by the emitter.
Are the mount and remote switch included?
Yes. The delivery set includes one B-9M mount and one KV-D2P V2.0 remote switch.
What configuration do the published dimensions describe?
They apply with the preinstalled rear section and batteries fitted, without the IR filter installed.
General
Mounting & Rails
Care & Chemicals
Reviews from customers
Used this product? Share your experience to help other customers choose.
