Zenitco B-51 Screw Kit - Replacement Pins and Hardware for the B-51 Rail
- $39.00
-
Zenitco B-51 Screw Kit - Mounting Pins and Hardware
Pin & Hardware Kit | Spare Part | For the Zenitco B-51 Receiver Cover Rail | Genuine Hardware
In short: The Zenitco B-51 screw kit is the complete set of mounting pins, washers, cotter pins and tools for the Zenitco B-51 receiver cover rail - genuine replacement hardware.
This is the mounting-hardware set for the Zenitco B-51 receiver cover rail. It contains the pins that secure the rail, the washers and cotter pins that lock them, plus a pin drift and hex key to fit everything. It is the same hardware Zenitco supplies with the B-51, offered here as a spare / replacement kit for install, service or lost parts.
Handy when you are re-installing a B-51, have misplaced the original pins, or want a spare set on the bench. Genuine Zenitco parts, correct size and fit - no guessing with generic hardware.
- Complete B-51 mounting set - pins, washers, cotter pins and tools
- Genuine Zenitco hardware - correct size and fit
- For install, service or replacing lost parts
- Includes a pin drift and hex key to fit it
- Keep a spare set on the bench
Technical Specifications
| Product Code | B-51-Screw-Kit |
| Type | Pin and hardware kit (spare part) |
| Compatible With | Zenitco B-51 receiver cover rail |
| Kit Contents | 2x pin, 2x washer, 2x cotter pin, pin drift, hex key |
Frequently Asked Questions
Overview
This is the genuine Zenitco replacement hardware set for the B-51 receiver cover rail. It contains the hinge pins the rail uses in place of the standard cover pin, together with the washers, cotter pins and the pin punch needed to fit them.
The pin punch matters: the standard pin must never be driven out with an empty hole left behind, and the punch is what holds the position while the new pin goes in. Replacing a worn pin restores the tight, repeatable seating the rail depends on.
A hex key is included, so the set is everything needed to refresh a B-51 installation that has developed play after long use.
What's in the Box
| ✓Hex Key | x 1 |
| ✓Pin Punch | x 1 |
| ✓Hinge Pin | x 2 |
| ✓Washer | x 2 |
| ✓Cotter Pin | x 2 |
Zenitco Specs
General
Mounting & Rails
Recommended
Zenitco, B-51, Screw Kit, Spare Part, Pins, Replacement Part, Bazalet