Zenitco Bazis Rail Clamp-Hook Mounting Set
Genuine Zenitco | Steel slotted nut block + countersunk screw | Mounts accessories on the Bazis rail | Spare part
In short: this is the genuine Zenitco clamp-hook mounting set for the Bazis rail. It is a two-piece steel fastener - a slotted nut block (the hook that seats inside the Bazis rail groove) and a countersunk slotted screw that clamps it down - used to secure accessories onto a Zenitco Bazis rail. It is the exact spare to keep on hand if you lose or damage the original during installation.
Overview
The clamp-hook is the second way of fixing an accessory to a Bazis guide, alongside the cam clamp. It consists of a steel hook and an M5x9 screw.
Where the cam clamp locks by rotating, the hook simply catches the rail edge and is pulled tight by the screw. That makes it the better choice at the point where the upper and lower brackets of a handguard meet, and anywhere a low, flat profile matters.
It is supplied as a spare so a lost or worn hook can be replaced without buying a whole accessory kit.
| ✓Zenitco Clamp-Hook | x 1 |
| ✓M5x9 Screw | x 1 |
Compatibility: designed for mounting accessories onto the Zenitco Bazis rail. Works with the standard Bazis rail groove found on Zenitco handguards and mounts. Check that your setup uses the Bazis rail before ordering.
Key Advantages
- Genuine Zenitco clamp-hook mounting hardware for the Bazis rail
- Two-piece steel set: slotted nut block + countersunk clamping screw
- The hook block seats in the Bazis groove for a secure, rigid fit
- Exact factory replacement spare part
Technical Specifications
| Brand | Zenitco |
| Part Type | Clamp-hook mounting set / fitting hardware (spare part) |
| For | Bazis rail (Zenitco) |
| Material | Steel |
| Includes | Slotted nut block + countersunk slotted screw |
| MPN | Zen-Clamp-Hook-Basis |
| Condition | New |
Frequently Asked Questions
What is this part for?
It is the Zenitco steel clamp-hook set that mounts accessories onto a Bazis rail - the slotted nut block seats in the rail groove and the countersunk screw clamps it down. A spare so you always have the correct fitting.
Which rail does it fit?
The Zenitco Bazis rail - the proprietary rail groove used on Zenitco handguards and mounts.
What does it include?
Two pieces: a slotted steel nut block (the hook) and a countersunk slotted clamping screw.
When do I use the hook instead of a cam clamp?
At the joint between the upper and lower handguard brackets, and wherever a lower, flatter fixing is preferable.
What is it made of?
Steel, with a standard M5x9 countersunk screw.
Is this a genuine Zenitco part?
Yes - it is an original Zenitco fitting with guaranteed US delivery.
Keep the correct fitting on hand - order the genuine Zenitco Bazis rail clamp-hook mounting set.
In Stock | Guaranteed US Delivery | Genuine Zenitco Part
General
Brand
Zenitco
Manufacturer Part Number (MPN)
Bazis rail clamp-hook mounting set
Condition
New
Intended Use
Range sports / Training
Material
Steel
Color / Finish
Steel (natural)
Mounting & Rails
Mounting
For mounting accessories onto the Zenitco Bazis rail
Rail Type
Two-piece steel set: slotted nut block seats in the Bazis groove + countersunk screw clamps it; factory spare
Function
Zenitco steel clamp-hook mounting set (slotted nut block + countersunk screw) for the Bazis rail
