A-3 Slingmount by Zenitco - Rotating Sling Ring for the Basis Rail
Genuine Zenitco | Machined D16T aluminum + steel ring | For the Zenitco Basis rail | Rotating loop | Durable black finish
In short: a genuine Zenitco A-3 slingmount. It is a rotating steel sling ring on a low-profile base that seats on the Zenitco Basis rail with an oval cam mount and locks with a single screw. The ring turns freely, so your sling follows movement without twisting. Supplied with the oval cam mount and screw.
Overview
The A-3 sling swivel mounts directly onto a Bazis guide. Two different fixings ship with it - a screw and a cam clamp - because which one you use depends on where along the guide the swivel ends up.
That choice is the practical point of this model: some positions on the guide take a screw, others need the clamp.
Compatibility Note: mounts anywhere along a Bazis guide, using either the supplied screw or the supplied cam clamp depending on the position.
The A-3 slingmount pairs a machined D16T aluminum base with a rotating steel loop. It installs on the Zenitco Basis rail using the included oval cam mount, which seats into the groove and locks with one screw, giving you a strong, free-rotating sling point wherever you need it.
Ideal for handguards from the Zenitco Sport, Joker and U lines that carry a Basis rail. A genuine Zenitco factory part, supplied with its oval cam mount and screw.
Compatibility Note: Made for the Zenitco Basis rail (as found on Sport, Joker and U-line handguards). For a Picatinny sling point use the A-1, for a flexible steel-cable loop see the A-2L, and for a fixed rigid loop see the A-1L.
Key Advantages
- Genuine Zenitco factory part with exact original fit
- Rotating steel sling ring - follows movement without twisting the sling
- Mounts on the Zenitco Basis rail with the included oval cam mount
- Locks with a single screw - strong and low-profile
- Machined D16T aluminum base with a steel loop
- Durable black anodized finish
Technical Specifications
| Brand | Zenitco |
| Part Type | Rotating sling ring for Basis rail |
| Mounts On | Zenitco Basis rail (oval cam mount + one screw) |
| Material | D16T aluminum base + steel ring |
| Finish | Black |
| In the Box | A-3 sling ring, oval cam mount, screw |
| MPN | Zen-A3-SLINGMOUNT |
| Condition | New |
Frequently Asked Questions
What is the A-3 slingmount?
It is a genuine Zenitco rotating sling ring for the Zenitco Basis rail. The steel loop turns freely on a D16T aluminum base and mounts with an included oval cam mount and screw.
What does it mount on?
The Zenitco Basis rail - the interface found on Sport, Joker and U-line handguards. The oval cam mount seats into the groove and locks with a screwdriver.
Why a rotating ring?
The loop rotates so the sling can follow your movement without kinking or twisting at the attachment point.
How is it different from the A-2L?
Both mount on the Basis rail. The A-3 uses a rotating rigid steel ring, while the A-2L uses a flexible braided steel cable loop.
Does it include the mounting hardware?
Yes - it ships with the oval cam mount and the screw needed to fit it to the Zenitco Basis rail.
Is this a genuine Zenitco part?
Yes - it is an original Zenitco part, supplied with its oval cam mount and screw and guaranteed US delivery.
General
Brand
Zenitco
Manufacturer Part Number (MPN)
Zen-A3-SLINGMOUNT
Condition
New
Intended Use
Sling attachment point for the Basis rail
Material
D16T Aluminum + Steel
Color / Finish
Black
Mounting & Rails
Mounting method
Zenitco Basis rail (oval cam mount + screw)
Function
Rotating sling swivel / sling anchor
